Two Classics. One Pedal. Endless Possibilities.
The Morning Glory and NOTAKLÖN come together in one compact enclosure, packed with some of the most versatile features ever put into a pedal.
This is the first pedal in a new vertical, two-in-one design, with top-mounted jacks and power for a cleaner, more efficient pedalboard setup.
Both circuits have their own input and output jacks, giving you the freedom to place other pedals between them or run each side through its own switcher loop. You get complete control over how you build your signal chain.
With a Red Remote jack for each circuit and four individual gain stages at your fingertips, this pedal gives you more ways to shape your tone, whether you’re playing live or recording in the studio.
The Flexibility You’ve Been Asking For
The biggest limitation with most two-in-one pedals has always been how the circuits are connected. You can change which circuit comes first, but you can’t insert another pedal between them or run each circuit through its own loop on a switcher.
The request for independent inputs and outputs has been made time and time again, so it finally has happened.
Now, the Morning Glory and NOTAKLÖN can work together exactly how you want them to, giving you the freedom to create a setup that fits your sound and your workflow.
CONTROLS
LEFT SIDE — NOTAKLÖN
Volume — Controls the output volume. Counterclockwise is less, clockwise is more.
Gain — Controls the amount of overdrive. Fully counterclockwise is clean, allowing up to +16dB of clean boost in conjunction with the Volume control. Fully clockwise is maximum overdrive. As the control is turned clockwise, the mid frequencies also increase.
Treble — Controls the amount of treble boost or cut. Noon is neutral.
+/- Toggle — “Shamrock Mod.” Increases the overall gain by +4 dB, increases midrange, and engages an additional stage of hard clipping.
RIGHT SIDE — MORNING GLORY V4
Volume — Controls the output volume. Counterclockwise is less, clockwise is more.
Drive — Controls the amount of drive or gain. As the Drive is increased, it also adds brightness. Counterclockwise is less, clockwise is more.
Tone — Controls the amount of brightness. Clockwise is brighter, counterclockwise is darker.
Gain Toggle — Engages high gain mode when flipped up. The LED will turn red to indicate high gain mode is active.
Bright Cut Switch — Inset switch on the right side of the pedal that cuts the highest frequencies if the overall tone is too bright.
Order Toggle — The center toggle allows you to select which effect comes first in the signal chain for different tones when stacking both sides. The toggle points toward whichever effect is first in the chain. The Order toggle has no effect when using the individual FX jacks.
JACKS
Main Input / Output — Use the far right input and far left output when using the Wanderer as a standard two-in-one pedal.
Individual FX Jacks — The individual input and output jacks allow you to separate the two effects for use with an effects loop switcher or other external routing.
Red Remote Gain (Morning Glory) — 1/4″ jack on the upper left side of the pedal. Connect a Red Remote to remotely switch the Morning Glory Gain toggle.
Red Remote +/- (NOTAKLÖN) — 1/4″ jack on the lower left side of the pedal. Connect a Red Remote to remotely switch the +/- toggle.
SPECIFICATIONS
- Silent Soft-Touch Switching, Buffered Bypass
- Individual input and output jacks for each circuit
- Red Remote jack for each circuit
- Top-mounted jacks
- 9VDC Center Negative, 165mA
THIS PEDAL MEASURES 4.7” X 3.5” X 1.5” AND CONSUMES 165mA. DO NOT USE MORE THAN 9VDC. DAMAGE MAY OCCUR AND YOUR WARRANTY WILL BE VOIDED.
***Not affiliated with or endorsed by Klon or Marshall Bluesbreaker.
Reviews
There are no reviews yet.